SYNERGY 160-3-NO107 - RENOLD 2 Inch Pitch Synergy LinkFor use with all sizes and types of chain where optimum security is desired. The link is supplied with bearing pins riveted into one outer plate. The other outer plate is an interference fit on the bearing pins, the ends of which should be riveted over after the plate is fitted. Press fit connecting links should only be used once; new links must be used to replace dismantled links. (See Riveting Chain Endless' for full instructions).

This 1025-15/16G bearing is a Self Lube Bearing Insert with a bearing insert with relubrication facility

the NJ412 SKF is made to ensure you get the maximum performance out of your machinery

6822 2rs1 Bearing Steel Thin Section with a Bore Diameter of 110mm Two Rubber Seals Normal Internal Clearance

this bearing also has a standard radial internal clearance The bearing's dimensions are 95x200x45

This 7222-B-TVP-UO bearing is a single row angular contact bearings with a modified internal construction

They have a 60° contact angle and an annular groove on the surface of the outer ring for dismounting the bearing from its seat on the screw drive shaft

3/16TF bearing is a Y-Bearing Take Up Unit with a bearing insert with grub screws

This LWHS25C4R480T1HS2 is a high rigidity ball type series linear way with a rail length of 480mm

74 08 B MP UO Heavy Series 40mm - Bore Size Angular Contact with 40° Contact Angle Brass Solid Window Cage Universal design for fitting in pairs

NUP 22 18 E TVP2 C3 Two Flanges on Outer Ring

This R375L is a medium

NU23 11 EC P Two Flanges on Outer Ring and No Flanges on Inner Ring 55mm - Bore Size Optimized Internal Design Roller Centred