Simplex 4090-9117 Module Addressable Power IsolatorUnder normal conditions, the 4090 9117 Addressable Power Isolator provides continuity between ports. In the event of a short circuit, or if requested from the FACU, the isolator opens a two pole electronic switch, isolating both power circuit conductors. Isolators power up in isolation mode and are directed to connect by the FACU. If the output wiring is acceptable, the isolator connects to the rest of the circuit. If the output wiring is shorted, the

Maximum of one left port and one right port duplex fiber media card for each modular network interface card

— 4100ES Flex 35

The zone splitter also has an All Call feature that will activate all speaker zones regardless of the individual toggle switch settings

and strobe intensity is set per appliance

red housing (cover ordered separately) (assembled in USA)

A common SLC input is used for all modules

Each sensor’s output is digitized and transmitted to the system fire alarm control panel every four seconds

Simplex 4905-9947 Mount Skirt

Discontinued and replaced with 4906-9153

The 4090-9119 Relay IAM allows a compatible Simplex fire alarm control panel ID Net communications channel to monitor an unsupervised input contact closure with one point and control an output relay with the other point

Simplex 4098-9682E 4-Wire Detector Relay Base

Silent Knight PS-DASP Dual Action Pull Station with Key Reset