Shrink chuck 4,5° HSK 40 - 06 - 80Application: For mounting tools with straight shanks. Note: Toolholders suitable for induction , contact and hot air shrink units. 3, 4, 5 with h4 tolerance and 6 32 with h6 tolerance For 3, 4 and 5 mm only solid carbide tool shanks must be used! All holders are made of forged steel Specific, low warpage hardened Surface hardened HRC 58~60 Hardening depth 0,8mm~0,9mm Taper angle tolerance < AT 3 according to DIN 2080 Surface roughness Ra < 0,4 m

- Setting the rotary table zero point of 5-axis machining centres

E1= 28 pieces

For all solid drills with cylindrical shank according to DIN 6595

2 x 53 x 18

Mode : Peak

- Tightness of the screw connection tested up to 80 bar

102 x 45 x 15

0V Battery

- Determining the reference points (calibration) of optical presetting devices

closable for tools with internal coolant supply

B showing the deviation of each block

The internal thread provided for the coolant tube in the PSC toolholder is plugged with the socket-head screw incorporated in the adapter