Airgas Model T265D580 Brass Ultra High Purity Single Stage Pressure Regulator With 1/4" FNPT ConnectionThe unique design of this regulator provides a continuous sweeping of the high pressure chamber. This design is specifically made for processes using analyzers and mixes gases with low levels of the gas components. This sweeping action prevents any drop out or change in the gas mixture and quickly removes any contaminants that may enter the regulator. These nickel plated single stage ultra high purity regulators are recommended for non corrosive

The needle valve model has the valve built into the regulator body reducing the gas path

The two-stage design yields a delivery pressure of less than 0

Round construction and elevated bottom encourage circulation of air around the can to disperse heat and reduce moisture buildup and rusting

minimum droop and a leak-tight bonnet seal

single-stage regulators is recommended for non-corrosive analytical and process applications

single-stage

purging and charging

The stainless steel diaphragm makes it suitable for analytical applications

The Airgas® Life Science Series System is an automatic switchover system designed to supply a continuous supply of high purity

Captured bonnet ports with optional vent adapters are standard on both stages and allow for the venting of hazardous gases in the event of diaphragm failure

This series of 316 stainless steel two-stage high-purity regulators is designed for non-corrosive analytical

single-stage regulator is well suited for closely monitored