ER-Collet with seal for IC ER40 | 472EH | < 15µm | Ø 22Application: Collets sealed for high pressure cooling 120 bar with IC DIN 6499 B (ISO 15488 B) ER system Note: Only nominal size d can be clamped (applicable up to 120 bar). In order to achieve an optimum sealing the tool must be clamped on the complete length of the ground drill of the collet.

For mounting straight-shank tools in collets

In order to achieve an optimum sealing the tool must be clamped on the complete length of the ground drill of the collet

3 / L2=63 HA polished Split Point - Valuetool

Synchro tapping chucks compensate synchronisation errors

For d = 60 only with four fi xation screws according to DIN 912

Improves chip evacuation and decreases the risk for chip jamming

5 with h4-tolerance and Ø 6 – Ø 32 with h6-tolerance5

For mounting straight-shank tools in collet chucks KPS-system

without cooling lubricant supply

For machining centres with synchronous spindle

With clamping screw and axial adjustment bolt

For safe clamping of taps