H&R 2.5 inch ID Single Race Spring | Length 10 inch | Spring Rate 225 lbs/inchInside Diameter: 2. 5 inch ID Length: 10 inch Spring Rate: 225 lbs inch H&R was founded by Werner Heine and Heinz Remmen in the 1970's with a simple idea in mind; with improved suspension, vehicles would have more control and better handling.

AP3VGT6 / LAP3VGT6 / LAP3VGR6 / LAP3VGT6+V / LAP3VGR6+V / RAP3VGT6 / RAP3VGR6 / RAP3VGT6+V / RAP3VGR6+V

021-121-121-A / 021121121 A / 021 121 121 A / 021121121A

All data was collected on the same day

Find the Replacement Rotors and Pads Below

Breakdown of the System Options

Choose between the Crystal Clear and Smoked Style Clear bumper side markers

This pulley will reduce the parasitic losses from the power steering pump at higher rpms by preventing pump over-rotation

all to produce the smoothest flow possible

Or they can get a DL-32data logger for hundreds of hours of 32-channel data logging on an SD card

It is also used to prevent siphoning when the injection nozzle is mounted after the throttle body or carburetor and is exposed to vacuum

The bump stops do not need to be trimmed on the S3

specifically engineered for the Volkswagen Mk7 Golf R